Trend Market Reversal Indicator Review 2025: Best Settings, No-Repaint Check & Download

Introduction: Catching the "big move" without getting burned

Trading reversals is the most dangerous game in Forex. It's widely known as "trying to catch a falling knife." If you time it wrong, you'll be cut. But if you time it right, you can catch the absolute bottom of a new trend and ride it hundreds of points higher while other traders remain afraid to enter.

The Trending Market Reversal Indicator for MetaTrader 4 (MT4) was designed to solve this specific timing problem.

Rather than guessing where the market might be based on intuition, this tool plots two specific exponential moving averages (EMAs) that serve as dynamic triggers. It ignores the tiny noise of intraday moves and only alerts you when momentum is actually changing.

If you're tired of staring at confusing charts and getting cut off on false reversals, this comprehensive review and guide will show you how to cut through the noise, filter out "false breakouts" and trade pure trends.

What is a trending market reversal indicator?

The Trending Market Reversal Indicator is a trend following technical tool that simplifies complex price action data into two easy-to-read lines. It belongs to the "Crossover" family of indicators.

Essentially, it is an optimized moving average system. It calculates the relationship between short-term momentum and long-term trend direction to discover the exact moment when control shifts from buyers to sellers (and vice versa).

The Two Key Lines:

1. Signal Rising Line (Quick EMA): This line reacts quickly to recent price changes. When prices surge, this line immediately moves upward.
2. Signal Falling Line (Slow EMA): This line is heavier and slower. It represents the "average" or average price over a longer period of time.

The Logic:

• Bullish Trend: When the fast line crosses above the slow line, it means that recent buying pressure is stronger than the long-term average. (Buyer wins).
• Bearish Trend: When the fast line crosses below the slow line, it means that recent selling pressure is dominant. (Seller wins).

Unlike standard moving averages, which can clutter your chart, this custom indicator is designed to be visually clean, changing color frequently to help you spot crossovers immediately.

Trending Market Reversals and Standard Moving Averages

You may ask, "Why should I download this custom indicator when I can put two moving averages on the chart?"

This is a valid question. However, this custom tool offers clear advantages to active traders:

Verdict: If you want to analyze the chart, use standard MA. If you want a clear trigger to trigger a trade, use the Trending Market Reversal Indicator.

Review: Pros and Cons of Trending Market Reversal Indicators

Before downloading, it's important to understand the limitations of this tool. Here’s our honest breakdown based on backtesting:

PROS (The Good)

• Visual Clarity: Eliminates the clutter of multiple raw moving averages on a chart.
• Objective Signals: The intersection is obvious; no need to guess “is it contact or intersection?”
• Filters Noise: The smoothing algorithm ignores small candlesticks better than the standard EMA.
• Free: It is a powerful tool at zero cost.

CONS (The Bad)

• Lag: Like all moving averages, it is a "lagging indicator." You can't capture the exact top or bottom (that's why we use the RSI filter below).
• Market Volatility Failure: This indicator will give false signals if the price moves sideways.
• No Magic Bullet: It requires secondary filters (such as support/resistance) to be profitable in the long term.

Indicator settings: Optimize for your style

One size does not fit all situations in trading. Depending on whether you are a scalper or a swing trader, you may need to adjust the indicator's internal settings.

When you attach an indicator to an MT4 chart, check the “Inputs” tab:

1. Faster_EMA_Period (default: usually 9 or 12):
   • Adjustment: Reduce this number (for example, to 5 or 7) to get faster signals for scalping. However, be warned: a faster signal means more false positives.
2. Slower_EMA_Period (default: usually 26 or 50):
   • Adjustment: Increase this number (for example, to 50 or 100) to filter out more noise. Higher numbers mean you will be entering a trend later, but the trend is more likely to be real.
3. Signal_Alerts (True/False):
   • Adjustment: Set to True to get a pop-up sound when a crossover occurs. This prevents you from staring at a screen all day.

Strategy: How to filter out “fake” products (error checking)

Here's a fact that most other websites won't tell you: In range (sideways) markets, this indicator will fail.

If the market is flat, the lines will keep crossing back and forth (the "wash effect"). You'll buy, get stopped, sell, and then get stopped again. To solve this problem we need a "false detection" filter .

We will add the Relative Strength Index (RSI) to confirm that the reversal is real.

Required Tools:

1. Trending market reversal indicator (default setting).
2. RSI (Relative Strength Index): Issue 14, Level 50 (Key), 30, 70.
3. Timeframe: H1 or H4 (best results).

1. Buying Strategy (Bullish Reversal)

We are looking for the end of a downtrend and the onset of a new uptrend.

1. The Setup: Watch as prices stabilize after falling.
2. The Signal: Wait for the Fast Line (Signal) to cross ABOVE the Slow Line.
3. Error checking (vital): Look at the RSI . The RSI line must cross ABOVE the 50 level .
   • Why? The RSI 50 level separates the bullish zone from the bearish zone. If the two lines cross but the RSI is still at 40, the momentum is too weak. Wait for RSI breakout.
4. The Trigger: Enter at the Close A candle that meets two conditions.
5. Stop Loss: Place it below the most recent "swing low".
6. Take Profit: Hold the trade until the lines cross in the opposite direction or price hits a major resistance level.

2. Sell Strategy (Bearish Reversal)

We want to go short at the top of the rally.

1. The Setup: Watch for prices struggling at high levels.
2. The Signal: Wait for the Fast Line to cross BELOW the Slow Line.
3. The False Check: Look at the RSI . The RSI line must cross BELOW the 50 level .
   • Why? An RSI below 50 confirms that bears are driving prices lower.
4. The Trigger: Enter at the Close of the candle.
5. Stop Loss: Place it above the most recent "swing high".
6. Take Profit: Exit when the trend changes path (lines recross).

Why Traders Fail on This Indicator (Psychology)

The mathematics of this indicator are valid. The problem usually lies with the trader. Here are the two biggest mistakes to avoid:

1. Trading the “Chop”: When the lines look like spaghetti (twisted together and flat), the market is deciding what to do. Do not trade. Wait for the lines to "fan out" or separate.
2. Revenge Trading: If you receive a false signal and lose 10 pips, do not re-enter immediately. Wait for settings to reset. "Error checking" (RSI filter) helps prevent this.

Mastering Moving Average Crossovers: Why Adding a Filter Changes Everything. "

How to install the Trending Market Reversal Indicator

For beginners, here are the quick steps to run the program on MT4:

1. Download the file from the link below.
2. Open MetaTrader 4 .
3. Click File > Open Data Folder .
4. Go to MQL4 > Indicators .
5. Paste the file there.
6. Right-click on "Navigator" in MT4 and click Refresh .
7. Drag the indicator onto the chart.

Frequently Asked Questions: Frequently Asked Questions

Final verdict: Is it worth using?